New TrailerSignal gives anyone working around a trailer a highly visible, simple trailer health and readiness status before it’s dispatched
CHARLOTTE, N.C. – Oct. 18, 2026 – A yard hostler can now tell from 50 feet away whether a trailer is ready to move. Phillips Connect TrailerSignal mounts on the nose of the trailer and turns health and status signals from doors, tires, lights, and liftgate smart trailer sensors into a simple, binary signal: green when the trailer is ready to go and amber when it is not. Phillips Connect is unveiling TrailerSignal today to coincide with the American Trucking Associations’ Management Conference & Exhibition (MCE).
TrailerSignal is part of Phillips Connect’s commitment to delivering simple, intelligent, and actionable information to everyone who comes in contact with a trailer. As fleets integrate smart trailer data into their business systems, that work can take time to reach every corner of the operation, but TrailerSignal gives everyone an instant read on trailer readiness, so the hostler, dock crew, maintenance tech, and driver all get the same answer.
“Every sensor we put on a smart trailer becomes more valuable when more people can act on what it knows,” said Mark Wallin, president of Phillips Connect. “TrailerSignal extends our sensor signals beyond the dashboard and puts them in front of everyone at the moment it matters most.”
TrailerSignal draws its status from the Phillips Connect sensors on the trailer and integrates with a fleet’s internal systems, so the light in the yard and the data in the back office tell the same story. Fleets choose which smart trailer signals feed the status, so the light reflects the conditions that matter most to their operation. Because the signal reads at a glance, no one needs to log in to Connect1 or check a phone to know whether a trailer is ready. The light stays on while the trailer is parked and turns off once it starts moving, and because it’s solar-powered, it lights up even when the trailer is disconnected from power.
Installing TrailerSignal on the nose of the trailer can be completed in as little as five minutes, and no wiring is needed. A solar panel recharges its built-in battery, and high-visibility green and amber LEDs read clearly from across the yard. The unit is ruggedized against dust and high-pressure washdowns and operates in freezing temperatures.
Phillips Connect at MCE
MCE attendees can see TrailerSignal in person and get a live demo at Phillips Connect Booth 28095 at the Charlotte Convention Center.
About Phillips Connect
Phillips Connect is a leader in smart trailer technology, giving fleets greater visibility into the location, health, utilization and cargo conditions of their trailers. The company’s Connect1 platform brings together data from sensors, cameras and integrated technologies to help fleets protect freight, reduce downtime and make better operational decisions. Phillips Connect technology is used by some of the world’s largest fleets to understand what is happening across their trailer operations and act on issues sooner. Headquartered in Irvine, California, Phillips Connect develops intelligent trailer solutions for the transportation industry. For more information, visit www.phillips-connect.com.
Launching with tires and lights, Insights helps identify slow leaks, blowouts, and intermittent lighting faults, and alert the people who can fix them
CHARLOTTE, N.C., Oct. 18, 2026 – With the launch of Phillips Connect Insights, fleets can now detect a slow leak on a trailer tire or a failing light circuit before either one turns into a breakdown or an out-of-service violation. Phillips Connect Insights, introduced today at the ATA Management Conference & Exhibition in Charlotte, N.C., identifies specific, critical issues from signal patterns and routes each one to the people who can address it.
Tires and lights are the first two categories of Phillips Connect Insights available.
“Fleets invest in smart trailer technology to transform how they run their operations, and Insights is how we keep delivering on that investment,” said Mark Wallin, president and general manager of Phillips Connect. “An on-highway blowout or violation can start as a slow leak on a tire or a faulty circuit, which makes Insights a critical addition to our customers’ smart trailer systems.”
Tire Insights
Phillips Connect Tire Insights identifies slow leaks and shows technicians which tire is losing air and how quickly, even when its pressure reads normal at the time of inspection or a fleet is running an automatic tire inflation system (ATIS). Tires account for 20.9% of vehicle out-of-service violations the second-most common category, according to the CVSA 2026 International Roadcheck.
When a tire blowout happens, Phillips Connect recognizes the sudden loss of pressure and notifies the fleet, allowing the team to send roadside help or reach the driver before more miles on a blown tire put a second tire, or the safety of the driver and load, at risk. Tire Insights also flags an ATIS that is not working properly, identifies imbalance between paired tires, and reports miles driven on under-inflated tires.
Lights Insights
Phillips Connect Lights Insights pinpoints which trailer light circuit has a problem, whether in the taillights, running lights, or marker lights. Insights also recognizes when a circuit cuts in and out, which is an intermittent fault that can point to a loose connection even if the light works when a technician goes to service it. For each issue, Insights tells the fleet to dispatch a trained technician and gives that technician a likely cause and what to check, including a burned-out bulb or water inside the lamp.
It can also tell the difference between a partial circuit fault and a full one and confirm when a fault has cleared. Lighting issues rank among the top five vehicle out-of-service violations in the CVSA 2026 International Roadcheck, at 11.9%.
Insights for Every Role
Phillips Connect will roll out Insights across its smart trailer applications, so fleet, operations, safety, and maintenance teams see prioritized issues in Connect1, drivers receive urgent tire alerts through DriverAssist, and technicians see what to address on each trailer through TechAssist. Insights also integrates with the systems fleets already use to manage maintenance and equipment by creating service tickets.
The launch follows a consistent approach at Phillips Connect, which adds the ability to understand new smart trailer signals and then builds the intelligence that turns those signals into action. The company plans to extend Insights across its smart trailer platform, with cargo activity during loading, unloading, and transit among the next areas of focus.
Visit Phillips Connect at MCE
Visitors to booth #28095 during ATA MCE, Oct. 17-20, in Charlotte, N.C., can see how Insights works across Connect1, DriverAssist, and TechAssist. Fleets interested in Insights can contact their Phillips Connect representative or visit www.phillips-connect.com.
About Phillips Connect
Phillips Connect is a leader in smart trailer technology, giving fleets greater visibility into the location, health, utilization and cargo conditions of their trailers. The company’s Connect1 platform brings together data from sensors, cameras and integrated technologies to help fleets protect freight, reduce downtime and make better operational decisions. Phillips Connect technology is used by some of the world’s largest fleets to understand what is happening across their trailer operations and act on issues sooner. Headquartered in Irvine, California, Phillips Connect develops intelligent trailer solutions for the transportation industry. For more information, visit www.phillips-connect.com.
How Nussbaum Transportation Uses Phillips Connect to Extend Trailer Life and Drive Fleet-Wide Efficiency
Founded in 1945 and headquartered in Hudson, Illinois, Nussbaum Transportation has built nearly 80 years of growth on a simple philosophy passed down from its founder: treat your people well, and the rest will take care of itself. Today, that philosophy shapes not just how Nussbaum manages its drivers, but how it manages its equipment. Operating nearly 600 trucks, 1,700 trailers, and roughly 540 drivers across all 48 contiguous states, Nussbaum needed more than good intentions to keep that scale running reliably. They needed visibility.
The challenge is not unique to Nussbaum, but it is acute at their size. Tractors generate a steady stream of driver input. Drivers live in them, report problems, and take ownership of their condition. Trailers are different. On any given day, two, three, four, or five different drivers might touch a single unit, with no single person accountable for its health. As Nussbaum grew from 200 to nearly 600 trucks, tracking 1,700 trailers spread across 48 states manually became unsustainable. The company also faced pressure common across the industry: new trailer purchases had slowed, making it more critical than ever to extend the useful life of the assets already in the fleet. Nussbaum made a strategic decision to push its trailer replacement cycle from 10 years to 15. That kind of confidence requires eyes on the equipment.
What challenges did Nussbaum Transportation face before partnering with Phillips Connect?
Nussbaum struggled with visibility across a fast-growing trailer fleet. With 1,700 trailers spread across 48 states and multiple drivers touching each unit, there was no single person accountable for trailer health. Manual tracking became unsustainable, and the company needed a way to extend trailer life without sacrificing confidence in the equipment.
How does Phillips Connect help Nussbaum prevent roadside failures?
Every Nussbaum trailer runs TPMS, ABS fault monitoring, light-out detection, and wheel-end temperature monitoring through Phillips Connect. Critical alerts go directly to the roadside team around the clock, allowing them to dispatch vendors before drivers are even aware of a problem.
How has Phillips Connect impacted Nussbaum’s CSA score?
Since deploying Phillips Connect, Nussbaum has seen a significant reduction in roadside events and costs. Their CSA score has improved to the point where Nussbaum now leads its benchmark group, an outcome the team attributes largely to real-time visibility into trailer health.
How did Phillips Connect help Nussbaum extend its trailer replacement cycle?
With full visibility into the health of every trailer in the fleet, Nussbaum moved from reactive maintenance to data-driven, condition-based PM. That confidence supported a strategic decision to extend the trailer trade cycle from 10 years to 15.
How does Nussbaum use CargoVision for cargo claims and freight security?
CargoVision documents the condition of loads at pickup and delivery, creating a timestamped record that protects Nussbaum in cargo claim disputes. Combined with door sensors and geofencing, the platform provides a chain of custody that deters theft and resolves shipper disputes with documented evidence.
How does TrailerID benefit Nussbaum’s drivers and operations?
When a driver connects to a trailer, TrailerID logs the hookup automatically and flows straight into Geotab for hours-of-service compliance. This eliminates manual entry, reduces errors, and removes disputes over which driver had which trailer. This is a significant time saver across a fleet of 600 drivers.
How does Phillips Connect support Nussbaum’s customers?
Account managers use Phillips Connect dashboards to give customers real-time visibility into their trailer pools: what is loaded, what is empty, and what is DOT-healthy. Customers can set their own min/max alerts without needing to call, improving planning and reducing friction.
When it comes to heavy-duty trailer lighting, Phillips Industries is a trusted name in the industry. Phillips Industries PERMALITE™ XT Trailer Lighting system is a comprehensive range of lights designed to provide exceptional visibility, durability, and reliability for commercial trailers. Our lights meet the highest standards of engineering , ensuring safety and peace of mind for drivers and fleet operators alike.
Operating in demanding conditions, trailer lights must withstand the rigors of the road and weather elements. Phillips Industries recognizes this requirement and has engineered their lights to be exceptionally durable and reliable.
The PERMALITE XT Trailer Lighting features groundbreaking BoardFree technology that eliminates the need for a Printed Circuit Board (PCB), enhancing the resilience of our products against damage caused by liquids or chemicals. Additionally, the overmolded and PCB-free design of BoardFree guarantees that our lighting solutions maintain exceptional resistance to corrosion, water, shocks, and impacts. Phillips Industries lighting products deliver unmatched performance and longevity in any environment.
When lights go out, numerous companies offer complimentary truck light replacements, yet the associated downtime leads to reduced efficiency and negatively impacts the fleet’s profitability. Phillips Industries provides a reliable solution. The durability of Phillips Industries BoardFree LED lights keeps trailers out of the shop for maintenance, and eliminates the need for drivers to carry replacement lights – translating into reduced maintenance costs and increased uptime for fleets – all maximizing operational efficiency.
Avoid Violations and Stay Compliant
Phillips Industries produces durable and reliable lighting products, designed to withstand the rigors of commercial vehicle use. Our high-quality lights reduce the chances of failures or malfunctions that could lead to CSA violations.
In addition, Phillips Industries lights meet or exceed relevant safety regulations, including those set by the Department of Transportation, which reduces the risk of CSA violations. Some CSA violations can result in putting your vehicle out of service – reducing productivity and impacting driver scores.
The PERMALITE XT Trailer Lighting series carries relevant certifications, such as FMVSS (Federal Motor Vehicle Safety Standards) and SAE (Society of Automotive Engineers) compliance, which validate the quality, safety, and performance of the lights. Fleet operators feel confident using Phillips Industries lights, because they know that their trailers are equipped with lights that meet the highest industry standards.
Unmatched Visibility and Increased Safety
One of the key factors in ensuring safe transportation is excellent visibility, especially for large trailers. Phillips Industries understands this critical need and has developed a range of lights that excel in providing unparalleled visibility on the road.
The PERMALITE XT Trailer Lighting series features advanced LED technology that produces bright, clear, and highly visible lighting. Our lights deliver maximum light output while consuming minimal power – making them energy-efficient and reducing strain on the vehicle’s electrical system. With their optimized light dispersion and wide-angle illumination, Phillips Industries lights ensure that other motorists can clearly see and identify the trailer, enhancing safety on the road.
By harnessing the power of sensors and data analytics via the Phillips Connect Smart7 nosebox and Connect1 monitoring platform, fleets can detect issues and alert drivers in real-time. This proactive approach significantly reduces the risk of accidents, making roads safer for everyone. Additionally, the system’s advanced lighting features increase the visibility of trailers to others, especially during adverse weather conditions or low-light situations, further minimizing the chances of collisions and potential for expensive liability.
Versatility and Ease of Installation
Phillips Industries understands the importance of versatility and ease of installation, especially for fleet operators who need efficient solutions for their trailers. The PERMALITE XT Trailer Lighting series offers a wide range of lights and accessories, allowing for flexible customization to suit various trailer configurations and applications.
In addition, Phillips Industries lights are user-friendly. Our plug-and-play connectors and pre-assembled components, make installation and maintenance easy, increasing uptime and simplifying maintenance procedures.
Optimizing Fleet Management
Efficient fleet management is crucial for trucking companies to stay competitive and maintain profitability. The Phillips Industries lighting, Phillips Connect Smart7 nosebox and Connect1 monitoring platform trio, offers a comprehensive solution for fleet managers to streamline operations and reduce downtime.
In addition to lighting, the Phillips Connect Smart7 nosebox and Connect1’s dashboard provide customizable real-time data on various aspects of a trailer’s health.
By continuously monitoring various aspects of a trailer’s health, fleet managers proactively identify potential issues and schedule preventive maintenance, minimizing costly breakdowns and unexpected repairs.
Moreover, the platform offers geofencing capabilities, enabling fleet managers to set virtual boundaries for their vehicles. Geofencing alerts can be configured to notify managers of dimming lights via Light Out√ or other maintenance issues when a truck enters or leaves a predefined area, allowing for efficient asset security and improved accountability.
The introduction of Phillips Industries lighting, the Phillips Connect Smart7 nosebox and the Connect1 monitoring platform has ushered in a new era of connectivity and safety in the trucking industry. By combining intelligent lighting systems with real-time data insights, these solutions enhance safety, optimize fleet management, and improve efficiency.
GET CONNECTED
With the ability to detect potential issues, monitor crucial vehicle parameters, and provide actionable insights, trucking companies can experience significant improvements in safety, productivity, and profitability. As technology continues to advance, innovations like the Phillips Industries PERMALITE™ XT Trailer Lighting, the Phillips Connect Smart7 nosebox and the Connect 1 monitoring system will shape the future of the commercial trailer industry, ensuring a safer and more efficient transportation ecosystem for all.